Hanna Instruments HI 98186 - Manual (Page 43)

43
BeepOn
Focus on the
BeepOn item.
Press the displayed functional key to enable/disable key.
When enabled, beep sounds as a short beep every time a key is pressed or
when the calibration can be confirmed.
A long beep alert that the pressed key is not active or a wrong condition is
detected while in calibration.
Instrument ID
Focus on the
Instr.ID item.
Press Modify.
Use ARROW keys to change the instrument’s ID. Press Accept to confirm or
ESC to exit without saving.
Language
Focus on the
Language item.
Use the desired functional key to change the option. Wait until the new
language is loaded.
If any language can be loaded, the instrument will work in safe mode. In this
mode all messages are displayed in English and Help is not available.