Hatteland Display HT B22 (Fanless) - Manual (Page 19)

Physical Overview - HT B22Gx STC-yzz-Mzzz
19
IND100133-52
PS/2 Keyboard and PS/2 Mouse INPUTS:
Connect the PS/2 keyboard cable to the PS/2 5P Purple Color ”KB” connector (female).
Connect the PS/2 mouse cable to the PS/2 5P Green Color ”MS” connector (female).
DVI-I or RGB / VGA OUT:
Enables a direct clone signal output from the computer. You may choose to use a DVI-I 29P cable directly or use a
DVI-I -> RGB adapter to use a RGB/VGA HD D-SUB 15P instead for this purpose. Connect the cable to the Connector
(female) and secure it to the hex spacers provided on the unit. Connect the other end to your equipment and secure it.
To learn more about Single Mode and Clone Mode connectivity, functionality and behaviour of signal detection, please
review “Notes” section in this manual.
VGA / RGB OUT:
Will output a clone signal from the computer for use with external display or monitor. Connects via a High Density
D-SUB 15P Female connector. Fasten the cable to the connector using the provided screws on the cable housing
itself.
COM1 Serial Port INPUT / OUTPUT:
1 x D-SUB 9P Male connector with RS-232 support. Fasten the cable to the connector using the provided screws on
the cable housing itself. Baud Rate Min: 50b/s, Max: 115200b/s (120Kb/s, suggested to use shorter cables),
Non-isolated port. Wake on ring is not supported and no ESD protection. Third-Party Technical Chip Driver Details:
http://www.st.com/web/en/resource/technical/document/datasheet/CD00001609.pdf
Connector area of unit
PS/2 Keyboard In
1 x USB1.1
PS/2 Mouse In
DVI-I/RGB Out
Expansion area for optional modules
RGB/VGA Out
RS-422/RS-485 (COM2)
RS-232 (COM1)
2 x RJ45 Network
4 x RS-422/RS-485 NMEA / ECDIS
Mic-in, Line-out
Power Input DC
Power Input AC
3 x USB2.0
For detailed pinout assignments and connector information, please review “Pinout Assignments” and
“Housing / Terminal Block Connector Overview” in this manual.