Hatteland Display HT B22 (Fanless) - Manual (Page 22)

Physical Overview - HT B22Gx STC-yzz-Mzzz
22
IND100133-52
Audio INPUT/OUTPUT:
All connectors are 3.5” Jack Stereo, non-amplified. AC’97 audio support. 5.1 channel. HD Audio. It can be configured
via the operating system to act as 2-channel, 4-channel, 6-channel or 8-channel. Please review 3rd party driver
software/manual to configure the channel setup. Note: For additional 2W Amplified output, use Expansion Area
Module (HT 00271 OPT-A1).
Light Pink / Mic In
Light Green / Line Out
- +
POWER INPUT:
Connect your DC power cable to the Terminal Block 5.08 connector. The internal DC power module supports 24VDC.
For more information, please review “Housing Connector Overview” earlier in this manual.
POWER INPUT:
The internal AC power module supports both 115VAC/60Hz and 230VAC/50Hz power input.
Multi-power note:
The unit has a dual input power supply which will accept both AC and DC input. If both inputs are connected, the
unit will be powered by AC. If AC is disconnected it will automatically switch over to DC without affecting the operation
of the unit. This makes it possible to use AC power as primary power and a 24V battery as secondary power,
eliminating the need for expensive UPS systems.
GROUNDING SCREW:
Please review “General Installation Chapter”, pt. 6 for more information.