HITEC X1 AC Plus: Single Port AC/DC Chargers - Manual (Page 16)

16
Charging in Fast Charge Mode allows for a shorter charge time and will result in
a slightly reduced charging capacity. To achieve maximum charge capacity, we
recommend you use the Lithium Balance Charge Mode. If a fast charge is nec-
essary, select the fast charge mode and follow the same charging instructions
as for the Lithium Charge Mode or Lithium Balance Charge Mode.
BEFORE YOU BEGIN CHARGING YOUR BATTERY, MAKE SURE YOU HAVE
READ AND UNDERSTAND ALL OF THE WARNINGS AND SEFETY INFOR-
MATION CONTAINED ON PAGES 4-7.
IN THE FAST CHARGE MODE, LITHIUM BATTERIES CAN BE CHARGED
WITHOUT THE USE OF A BALANCE ADAPTOR. A BALANCE ADAPTOR
CAN BE USED, BUT IT IS NOT REQUIRED. BALANCE CHARGE MODE IS
RECOMMENDED FOR ANY BATTERY WITH A BALANCE LEAD.
See page 12 for the appropriate charging connections setup for this operation.
Lithium Balance Charge Mode (cont.)
Lithium Fast Charge Mode
Lithium
Once charging has commenced, the charger will display
the following real-time information: Battery type/cell
count, charging current, battery voltage, charging time and charged capactiy.
DURING CHARGING, THE BATTERY SHOULD BE PLACED INSIDE A
FIRE PROOF/RETARDANT BAG AND ON A FIRE PROOF SURFACE, AWAY
FROM OTHER COMBUSTIBLE OBJECTS.
During charging you may press the ✚ button to view
the voltage of each individual cell.
Once the battery is fully charged the screen will read “
FULL
” and the charger
will emit a chiming sound. Press the ■ button to stop charging. You may press
the ■ button at any time during the charging process to stop charging.
Caution
Li3s 1.2A 12.69V
BAL 022:43 00682
4.09 4.09V 4.09V
0.00 0.00V 0.00V
Note
Warning