HITEC X1 AC Plus: Single Port AC/DC Chargers - Manual (Page 27)

27
Save Data Program (cont.)
Load Data Program
Lithium Save/Load Data
Press the ► button again and the voltage rate value
will begin fl ashing. Use the ✚ or ▬ buttons to set the
voltage rate and cell count. The cell count will change automatically as you
change the voltage. The voltage and cell count should match the battery label.
Press and hold the
► button and this profi le will be saved.
Press the ■ button repeatedly until you reach the “
LOAD DATA
“ program. Press
the ► button to enter the program. When you enter the program, the profi le
number will be fl ashing. Use the ✚ or ▬ buttons to choose which profi le (1-5)
you wish to load.
Press and hold the
► button and the profi le will be loaded.
LiPo CHARGE *
5.4A 7.4V(2S)