Labconco XPert Filtered Balance Stations 3962622 User Manual
Page 19
![background image](/manuals/738615/19/background.png)
Chapter 3: Getting Started
Product Service 1-800-522-7658
15
Installation of HEPA Filters and Accessory Odor
Control Carbon Filters
HEPA Filters
HEPA filters are shipped installed with the gasket on the downstream side. The
HEPA filters are leak checked at Labconco. A second leak check is recommended
before using the enclosure and at least annually thereafter. Consult your Safety
Officer and Chapter 6 for the HEPA Filter Leak Test and HEPA Filter Bag-In/Bag-
Out Procedure. See Figure 4-2 for HEPA filter location, HEPA filter gasket, filter
clamp bolts, and bag-in/bag-out flange. The XPert enclosures have a true bag-
in/bag-out HEPA filter to safely dispose of the filter. All seams upstream of the
HEPA filter are jacketed by negative pressure. This intrinsically safe design
ensures containment.
Carbon Filters (Accessory for Odor Control only)
For carbon filter installation, first remove the upper perforated cover, secured by
Phillips head screws, on the top of the enclosure. See Figures 4-1 and 4-2 for
location of the upper perforated cover. See Chapter 7 for a list of available carbon
filters. All carbon filters are simply gravity installed with the gasket side down
and down stream on the exhaust side of the HEPA filter. Install the correct carbon
filter for the application.