Labconco Protecto Series Evidence Drying Cabinets 3400004 User Manual
Page 6
Product Service 1-800-522-7658
2
C
C
h
h
a
a
p
p
t
t
e
e
r
r
2
2
:
:
P
P
r
r
e
e
r
r
e
e
q
q
u
u
i
i
s
s
i
i
t
t
e
e
s
s
Before you install the evidence drying cabinet, you need to plan the site for
installation. Examine the location where you intend to install the cabinet.
You must be certain that the area is level and of solid construction. In
addition, a source of electrical power must be located near the installation
site.
Carefully read this chapter to learn:
• Location requirements.
• Electrical power requirements.
• Exhaust requirements.
• Service utility requirements.
• Space requirements.
• Drain requirements.
• Water Supply Requirements (Models #3400010 thru -14, 3404010
thru -14, and 3405010 thru -14 Only)
Refer to Appendix C: Specifications, for complete cabinet electrical and
environmental conditions, specifications and requirements.
Space Requirements
The dimensions for the Evidence Drying Cabinet are shown in Appendix B:
Dimensions.
Clearance
A minimum clearance of at least 6 inches (150 mm) is suggested on the top
of the cabinet for service. There should be 36 inches (914 mm) clearance at
the front of the cabinet to allow the door to swing open without hitting any
obstructions.