Labconco Protecto Series Evidence Drying Cabinets 3400004 User Manual
Page 9
Product Service 1-800-522-7658
5
C
C
h
h
a
a
p
p
t
t
e
e
r
r
3
3
:
:
G
G
e
e
t
t
t
t
i
i
n
n
g
g
S
S
t
t
a
a
r
r
t
t
e
e
d
d
Now that the installation site is properly planned, you are ready to inspect
and install the Protector Evidence Drying Cabinet. This chapter covers how
to:
• Unpack and move the cabinet.
• Install the cabinet.
• Connect the electrical supply source.
Tools required for installation of the cabinet include two 1/2" wrenches, a
flat-blade screwdriver, a #2 Phillips screwdriver, scissors, or a box knife.
Note: The 3’ cabinet weighs approximately 300 lbs. (136 kg), 4’ cabinet 400
lbs. (182 kg), and 5’ cabinet 510 lbs. (232 kg). The shipping pallet allows for
lifting with a mechanical lift truck or floor jack. If you must lift the product
manually, use at least six (6) persons and follow safe-lifting guidelines. All of
the cabinets are very heavy, use a mechanical lift and safe moving
practices at all times.
Unpacking the Cabinet
Carefully remove the outer carton and inspect the cabinet for damage that
may have occurred in transit. If the cabinet is damaged, notify the delivery
carrier immediately and retain the entire shipment intact for inspection by the
carrier.
Note: United States Interstate Commerce Commission rules require that
claims be filed with the delivery carrier within fifteen (15) days of delivery.
Do not return goods without the prior authorization of Labconco.
Unauthorized returns will not be accepted.