MOCET IP Commander - Manual (Page 11)

Page 11 Page 11
IP Commander for iOS VoIP User Manual
Key Description
Hotline
Press this key to make an emergency call whether the iPad is
attached or not. A red LED is used to indicate its status, this
feature requires a VoIP service subscription and programming
3 contact numbers in advance.
Home
Press this key to pop-up a dialog box in your iPad to ask you if
you want to launch IP Commander, just like the behavior of
plug-in your iPad into the IP3092.
Speaker
Press this key to enable or disable the Speakerphone; a blue
LED is used to indicate status
Mute
Press this key to mute or un-mute a call (the other party will not
be able to hear you).
Headset
Press this key to enable or disable the VoIP Phone’Headset
feature.
Volume
Volume control keys to adjust volume of Handset Receiver,
Handset DTMF output, Handset Ring output, Headset
Receiver, Headset DTMF output, Headset Ring output,
Speakerphone output, Speakerphone DTMF output and
Speakerphone Ring output
IP Commander Function Keys and Buttons
Key Description
Numeric keypad
Use the numeric keypad to dial the phone number.

The LCD window displays the numbers you entered.
Note: You may use the soft-key to delete the last digit.
Voice Mail
Press the Voice Mail key to check the voicemail box in the SIP
Server.
To enable the voicemail function, you have to configure the
voicemail setting in the line setting. Please refer to Section
3.2 Line Setting of this user manual for more information.
Last number redial
Press the Redial key to redial out the last dialed number.
Mute/Un-mute
Press the Mute key on the Commander to mute or un-mute
VoIP phone call.
It is the same function of the Communicator’s Mute hard key.