MOCET IP Commander - Manual (Page 37)

Page 37 Page 37
IP Commander for iOS VoIP User Manual
6.2 Read voicemail messages
You may read the left voice messages by dialing in the voicemail box from both base
handset and any one of DECT handsets.

From base handset, you may dial in the voicemail box by just following the step :
Placing a Call by dialing the mailbox ID number which is specified Local
Voicemail Settings Section 4.1.

From DECT handset, you may dial in the voicemail box just dialing the mailbox ID
from DECT handset’s keypad.
When dialing in the voicemail box, an IVR will prompt you to enter your pin, then you
will input the pin code that specified in the Local Voicemail Settings to pass the
authentication of entering voicemail box. After entering the voicemail box, you can
read the left messages by just following the instructions of IVR.
You can also press the Voice Mail softkey ( ) in the Commander screen to enter
the local voicemail box. Before using the Voicemail softkey, you must do the
voicemail setting in the line setting. Please refer to Section 3.4.2 Line Setting of this
manuel for more information about Voice Mail softkey configuration.
Voicemail key in IP Commander