MOCET IP Commander - Manual (Page 7)

Page 7 Page 7
IP Commander for iOS VoIP User Manual
Audio System Control
For the first time when you start the IP Commander, you may need to configure the
audio system control. From the Commander main menu, select “Settings” command,
then select the “Audio System Control” sub-command, you will find there are two
configurable settings (see below pictures):
1. Commander Enable
2. Audio System Control
Select “Settings” command
Select “Audio System Control” sub-command
Commander Enable
The first command “Commander Enable” is used to enable or disable the IP
Commander on your iPad.
If you set the “Commander Enable” on, a dialog box (see below picture) will be
displayed to ask you if you want to launch IP Commander or not when you plug your
iPad into the IP3092 Communication, you may ignore or allow the IP Commander to be
launched.
1.
2.