MOCET IP Commander - Manual (Page 8)

Page 8
IP Commander for iOS VoIP User Manual
Audio System Control
By default, the speakerphone, handset and headset of the IP3092 Communicator work
with iPad apps like Skype, FaceTime, Hookflash or playing music or movie without any
configuration. To use the built-in VoIP feature of the Communicator, you have to switch
the audio system control for IP Commander and switch the priority of the audio from
iPad to IP Commander.
When the IP Commander app is enabled, the Communicator’s VoIP phone will share the
audio system with iPad Apps. The Communicator’s audio system can auto switch to
the activated audio source from VoIP Phone or iPad App if only one source is active.
But when both audio sources are active at the same time, the usage of IP3092
Communicator’s audio system will be conflicted. To determine whether the VoIP phone
or the iPad app has the priority for audio control, a privilege setting can be configured for
each. There are three audio system control privileges:
1. IP Commander
2. iPad App
3. Auto
1. Commander
Setting the audio system control at “Commander” mode, the VoIP phone will take the
privilege to use the audio system. For example, when you are listening music, at the
same time, an call is incoming, the Communicator will stop the music then switch to the
IP Commander that will play the ring tone to indicate an incoming call.
2. iPad App
Setting the audio system control at “iPad App” mode, the iPad App will take the privilege
to use the audio system. Setting in this mode, any incoming call will be no ringing and
ignored if you are playing music on your iPad.
3. Auto
Setting the audio system control at “Auto” mode, the App that is running at the
foreground will take the privilege to use the audio system. For example, when IP