MOCET IP Commander - Manual (Page 14)

Page 14
IP Commander for iOS VoIP User Manual
3. Basic Setting
To enable the VoIP Phone function, you need to subscribe to an ITSP service or have
your Communicator configured to use your company’s IP PBX. This chapter will guide
you through the basic configuration for the network setting and SIP account setting for
Commander on your Communicator.
Before beginning this part of the configuration, you must connect your Communicator to
a local area network (LAN) over Ethernet, which will allow the Communicator connect to
a local or remote SIP server. Please refer to IP3092 Communicator Quick User Guide
for establishing the Ethernet connection.
3.1 Network Setting
To configure the network type as Static IP or DHCP
1. Select “Settings” command from the main menu
2. Select “ Administrator Settings” from the sub-command area
3. IP Commander will ask you to input Admin Password. The default admin
password is “1234”. (The admin password can only be changed from IP3092
Communicator’s Web interface. Please refer to chapter 11: Using Advanced
Features of this user manual for more information)
4. Enter the password and “Confirm”
5. Select “Network Settings” from the sub-command area
6. A Network type selection menu will be displayed as follows. You can specify the
network type as DHCP or static IP from this page.