MOCET IP Commander - Manual (Page 6)

Page 6
IP Commander for iOS VoIP User Manual
2.3 Running the IP Commander App
Once the IP Commander app is installed on you iPad, you can launch it by clicking on its
icon . When the IP Commander launches it will display messages showing the
synchronization progress of the app with the IP3092 Communicator. This process
takes around 30 seconds. During this period, the pre-configured data in Communicator
will be transferred to IP Commander through iPad’s Apple connector (30-pin or Lightning
8-pin connector depends on what model your iPad is).
After the IP Commander synchronization completed, the default main menu of IP
Commander will be displayed as follows:
Settings
To use the VoIP feature of the IP3092 Communicator and IP Commander, you should
consult to your administrator or service provider about how to configure the SIP account
or provide you with the necessary account information. These vary quite a bit from
service provider to service provider. So be sure to request enough help for configuring
the Communicator properly.
Then you can configure the rest of the user level settings. For detailed explanation of the
network and line settings, please refer to Chapter 3 – Basic Network Settings.