MOCET IP Commander - Manual (Page 24)

Page 24
IP Commander for iOS VoIP User Manual
2. Select “Line Settings (User Level)” from the sub-command area
3. Select “Line X” (X = 1 ~ 4) from the sub-command area.
4. Select Call Block from the sub-command area
5. Fill in the phone numbers that you want to block for this line to the table shown as
follows:
4.11 Programmable Keys Setting
The IP Commander provides 16 programmable keys for your IP Phone. You can
configure each key for different features. The programmable keys lay on the right side
of IP Commander screen.
To use a configured programmable key, you just press the key, and then the configured
feature will be executed. Dome features will blink the virtual soft LEDs or turn on the
related features.
To configure programmable keys, please follow the following steps:
1. Select “Settings” command from the main menu.
2. Select “Programmable Keys” from the sub-command area
3. Select “Key X” (X = 1 ~ 16) you want to configure from the sub-command area.
4. Find the programmable function from the sub-command and fill in the required data
to configure the selected programmable key.
5. Press “Save” to confirm the configuration.
The available programmable key commands are listed in below table:
Option Name Function
Do Not Disturb Enable/disable DND feature.