MOCET IP Commander - Manual (Page 16)

Page 16
IP Commander for iOS VoIP User Manual
3.3 Phone Setting
You can customize your own IP Phone functions by configure the Phone Settings from
Settings command. These functions include Volume Settings. Call Features, and
Hotline settings.
3.3.1 Volume Setting
To adjust the volume control of Handset, Headset, Speakerphone, and Ringer, please
follow the steps:
1. Select “Settings” command from the main menu.
2. Select “Phone Settings” from the sub-command area
3. You may adjust the volumes for different voice devices individually from below
screen display:
3.3.2 Call Features
You may put your IP phone in DND mode, Auto Answer mode, or Call Waiting mode
by enabling or disabling the Call Features buttons:
1. Select “Settings” command from the main menu.
2. Select “Phone Settings” from the sub-command area
3. Select “Call Features” from the sub-command area
4. You may enable/disable the DND, Auto Answer, and Call Waiting modes from
below screen display:
DND (Do Not Disturb) mode
If enabling DND mode, the IP Phone will reject all incoming calls.
Auto Answer mode
If enabling Auto Answer mode, the IP Phone will auto answer an incoming call without
human intervention.