MOCET IP Commander - Manual (Page 45)

Page 45 Page 45
IP Commander for iOS VoIP User Manual
9. Advance Settings
In IP Commander, you can do a lot of advance settings with administrator authorization.
These advance settings include:
1. Network Settings (Refer to Section 3.1)
2. Line Settings (Refer to Section 3.2)
3. APS Settings (For Broadcom’s Broadworks)
4. UC-One Settings (For Broadcom’s Broadworks)
5. Instant Messaging Settings
To enable the above advance settings, you must login as administrator by following
steps:
1. Select “Settings” command from the main menu
2. Select “ Administrator Settings” from the sub-command area
3. Input Admin Password and “Confirm”. The default admin password is “1234”.
9.1 APS Settings
An auto provisioning server (APS) allows for flexibility in installing, upgrading,
maintaining, and configuring the IP3092 Communicator. The provisioning server can be
set up on the local LAN or anywhere on the Internet. The IP3092 Communicator phone
is designed such that if it can not locate a provisioning server when it boots up, it will
operate with internally saved parameters. This is useful when the provisioning server is
not available.
To use Auto-Provisioning Service, you need to make sure provisioning files, provisioning
server and IP3092 Auto-Provisioning Service setting are configured ready. For more
detailed information about how to preparing the auto provisioning service, please refer to
IP3092 Communicator’s Administration Manual.
There are 12 parameters for auto-provisioning setting in IP Commander: