Pitney Bowes DI950 FastPac Inserter - Manual (Page 169)

SV61311 Rev. E 8-25
Scanning • 8
OMR
Specifications
(continued)
Direction of Feed
Clear Zone
Leading Edge
11 mm min.
to clear zone
(dotted line),
20 mm min.
to first mark
Trailing Edge
2 mm min.
3
mm
min.
9 mm
min.
9 mm
min.
3
mm
min.
OMR Mark Specification Diagram
(Diagram is not to scale)
Feeder Tower: 125 mm max.
HCSF: 105 mm max
Feeder Tower: 20 mm min.
HCSF: 32 mm min.
10
mm
min.
11 mm min.
to clear zone
(dotted line),
20 mm min.
to last mark
OMR Mark Specs at a Glance
Description
Metric English Closest Fraction
Minimum line width for OMR or barcode marks 10mm 0.40” 7/16”
Minimum spacing between OMR marks 2.5mm 0.10” 1/10”
Maximum spacing between OMR marks 4.5mm 0.18” 3/16”
Minimum space between mark clear zone and paper edge 11mm 0.42” 7/16”
Minimum clear zone on sides of marks 3mm 0.12” 1/8”
Minimum clear zone on tops of marks 9mm 0.38” 3/8”
Distance from top of sheet to first mark 20mm 0.79” 3/4”
Distance from bottom of sheet to last mark 20mm* 0.79” 3/4”
Maximum length of code 89mm 3.50” 3-1/2”