Pitney Bowes DI950 FastPac Inserter - Manual (Page 30)

2-12 SV61311 Rev. E
2 • Meet the Inserting System
Resettng the Batch Counter
The Batch Counter counts up to a set number. It increments one count for
each completed mail piece that the system detects. The system stops when
it reaches the batch count.
To reset the desired number for the job you are running:
1. Press RESET COUNTERS to display the Reset Counters screen.
2. Select "Batch Count".
3. You will be returned to the Home screen. The Batch Counter at the bot-
tom of the screen will return to its original setting.
NOTE: The original setting for the Batch Counter cannot be less than “5” or
greater than “9999”.
Resettng Both Counters
The Reset Both selection allows you to reset both the Piece Counter and the
Batch Counter to zero.
1. Press RESET COUNTERS to display the Reset Counters screen.
2. Select "Both".
3. You will be returned to the Home screen. The Piece Counter at the bot-
tom of the screen will read "0" and the Batch Counter will return to its
original setting.
Help
Select "Help" for information about the screen that currently displays and for
access to the entire Help file.
Cancel
Select "Cancel" to return to the previous screen.
NOTE: If you made changes to a job before pressing "Cancel", you are prompted
to save the changes. Press "Yes" to save the changes; press "No" to delete the
changes and to return to the last screen in which you saved changes. Be aware
that once you delete the changes, they are permanently gone.
Home
Select "HOME" to return to the Home screen for the current job. The current
job will automatically include any changes made while editing the job. Al-
though the job can be run now, the changes are not saved until you choose
"Save Job" from the menu. Jobs that have been changed but not saved
have an asterisk next to the job name at the top of the Home screen.
Fixed Function
Keys (continued)