Pitney Bowes DI950 FastPac Inserter - Manual (Page 61)

SV61311 Rev. E 3-19
Basic Operation • 3
Perform Width Adjustments (Outer Envelope Openers)
1. Loosen the thumbscrews on the top of the Outer Envelope Openers.
Adjusting
the Envelope
Openers
(continued)
Figure 3.9.2: Outer Envelope Opener Locations
Outer Envelope
Opener
Thumbscrews
2. Slide the Openers as required to align the pointers with the outer edges
of the envelope.
• Push down on the thumbscrews to ensure the Outer Envelope Open-
ers align with the envelope.
• If using small envelopes (less than 194mm wide), move the Outer
Envelope Openers out and away from the outer edges of the enve-
lope.
• If using windowed envelopes, ensure the Outer Envelope Openers
do not touch the edges of the window.
3. Tighten the thumbscrew on the top of the Outer Envelope Operners.
Align pointer with outer
edge of envelope
Figure 3.9.3: Aligning the Outer Envelope Opener