Rocktron HUSH Ultra - Manual (Page 18)

18
HUSH ® Function
The HUSH I/O parameter simply determines whether the HUSH® circuit is active
for the current preset. When "IN" is selected the HUSH is active. When "OUT"
is selected the HUSH is "OFF".
The EXP THRESHOLD (Expander Threshold) parameter determines the level at
which downward expansion begins. For example, if the EXP THRESHOLD was
set at -20(dB) and the input signal dropped below -20(dB), downward expansion
would begin.
The GATE THRESHOLD his control is used to determine the level at which the
gate will begin to operate. As the input signal drops below this level, the gate
will activate and downward expansion will begin.
HUSH I/O
EXP
THRESH1
GATE
THRESH1
HUSH IN/OUT
HUSH_ THRSH_A 1 .. 64
GATE_ THRSH_A 1 .. 64
* HUSH_ THRSH_B 1 .. 64
* GATE_ THRSH_B 1 .. 64
* HUSH_ THRSH_C 1 .. 64
* GATE_ THRSH_C 1 .. 64
* HUSH_ THRSH_D 1 .. 64
* GATE_ THRSH_D 1 .. 64
* Only used when MIDI MCC LINK is active.