Rocktron HUSH Ultra - Manual (Page 26)

26
NOTE: If you have changed a parameter the "STORE" LED will light. The change(s) that you made
will not be stored until you have pressed the "STORE" button. Please follow instructions on the next
page for details on how to store changed parameters.
CHANGING PRESET PARAMETERS
M I D I R X O M N I
* * * G L O B A L * * *
STEP 1 - Enter EDIT MODE by pressing the STORE/EDIT button as shown above. When in EDIT
MODE the display will show you are in "EDIT MODE" on the top line.
STEP 2 - To access the first "FUNCTION" to be adjusted, turn the PRESET/FUNCTION SELECT
knob. The display will then show:
* * * G L O B A L * * *
* * E D I T M O D E * *
STEP 3 - To access the first "PARAMETER" to be adjusted, turn the GATE THRESHOLD/PARAM-
ETER SELECT knob. The display will then show:
M I D I R X 1 6
* * * G L O B A L * * *
STEP 4 - To adjust the selected "PARAMETER", turn the HUSH THRESHOLD/PARAMETER AD-
JUST knob. The display will then show the adjusted parameter: