Rocktron HUSH Ultra - Manual (Page 31)

31
Any or all of the HUSH Ultra's presets may be dumped to another HUSH Ultra a sequencer or MIDI
utility program using a PC midi interface to create a ( .syx ) file. All the information about the presets
you have created will be dumped consisting of parameter values, title characters and controller assign-
ments. When dumping a single preset into another HUSH Ultra, the dumped preset can be loaded into
any preset location on the receiving unit.
Note: The HUSH Ultra midi data when sent by external means such as a PC MIDI utility program you
will need to configure it as stated below.
Buffer size 264 bytes
No of buffers 16 both RX and TX
100ms between buffers be used initially as a starting point.
100ms after F7 [ optional ]
If a MIDI sequencer is used to store the data record the Sysex data in real-time or adhere to the param-
eters given above.
MIDI DUMP/LOAD
Step 2
Step 3
M I D I D U M P / L O A D
Step 1 Connect a standard MIDI cable from the MIDI OUT of the transmitting HUSH Ultra
to the MIDI IN of the receiving HUSH Ultra. Consult MIDI Connection drawing for
more information.
If you are dumping a single preset to another HUSH Ultra, the transmitting HUSH
Ultra must have that preset selected.
Press the "STORE/EDIT" button to enter into the "EDIT MODE". Turn the FUNC-
TION SELECT knob to MIDI DUMP/LOAD.
Step 4 On the receiving HUSH Ultra use the PRESET Select control to select the preset
location where the received preset will be stored. Note that the preset currently stored
at the selected location will be lost when the new preset is received.