Rocktron HUSH Ultra - Manual (Page 30)

30
Now the PARAMETER SELECT correlates to the MIDI RECEIVED PRO-
GRAM CHANGE number (number on the left side of screen.)
The PARAMETER ADJUST selects the PRESET that will be recalled (Number
on the right side of the screen) when the received program change is executed.
In above example the HUSH ULTRA received a PROGRAM CHANGE from a
midi controller for preset 1. The actual preset recalled will be 15!
Note: PRESET MAP in the GLOBAL FUNCTION must be set to ON for map-
ping to be active.
IMPORTANT:
After you have completed all your preset mapping you must execute STORE
before leaving the PRESET MAPPING function.
PRESET MAPPING Function
Step 2
Step 3
Step 1 Use FUNCTION SELECT while in EDIT MODE to select the PRESET MAP-
PING function
Turn the PARAMETER SELECT to enter the MAPPING MODE.
* P R E S E T M A P P I N G *
* P R E S E T M A P P I N G *
1 M A P T O 1 5