Rocktron HUSH Ultra - Manual (Page 27)

27
STORING CHANGED PRESET PARAMETERS
While viewing a function or parameter title, press the STORE button to start the store procedure. The
words "STORE AT PRESET" will now be flashing under the changed preset name as shown below. If
you would like to store the changes made at the current preset, simply press the STORE/EDIT but-
ton again and the changes will be stored. The word "STORED" will flash once and the preset will be
stored.
If you like to store the changes made at a different preset number, while viewing a function or parameter
title, press the STORE button to start the store procedure. The words "STORE AT PRESET" will now
be flashing under the changed preset name. Next turn the PRESET SELECT knob to the desired preset
number and press the STORE/EDIT button. The word "STORED" will flash once and the preset will be
stored at the selected preset
1 u s e R 1
S T O R E A T P R E S E T
2 U S E R 1
S T O R E A T P R E S E T
1 u s e R 1
S T O R E A T P R E S E T
1 u s e R 1
S T O R E d
1 u s e R 1
2 u s e R 1
STORE CHANGES AT THE SAME PRESET
STORE CHANGES AT A NEW PRESET