Rocktron HUSH Ultra - Manual (Page 20)

20
GATE THRESHOLD 3 control is used to determine the level at which the gate will
begin to operate. As the input signal drops below this level, the gate will activate
and downward expansion will begin. Note that this is only used with the MIDI
MCC Link is active.
EXPANDER THRESHOLD 4 parameter determines the level at which downward
expansion begins. For example, if the EXP THRESHOLD4 was set at -20(dB) and
the input signal dropped below -20(dB), downward expansion would begin. Note
that this is only used with the MIDI MCC Link is active.
GATE THRESHOLD 4 control is used to determine the level at which the gate will
begin to operate. As the input signal drops below this level, the gate will activate
and downward expansion will begin. Note that this is only used with the MIDI
MCC Link is active.
GATE THRESH3
EXP THRESH4
GATE THRESH4
GLOBAL Function continued....