Datalogic Scanning DLL2020 - Manual (Page 12)

GETTING STARTED
5
1
1.4 SCANNER LABELLING
There are four labels on the scanner. The first three labels can be found
on the housing of the DLL2020, as indicated in the figures below. The
fourth label is visible through the scanner window.
All the labels have been attached by the manufacturer and should in no
case be removed.
+5V
250mA
CAUTION:
Laser light when open
Do not stare into beam
DATALOGIC SPA - ITALY
DO NOT BREAK SEAL
WARRANTY VOID IF SEAL IS BROKEN
DATALOGIC SPA
Via Candini 2
40012 LIPPO DI-
CALDERARA (BO)
ITALY
www.datalogic.it
NO SERVICEABLE PARTS INSIDE Model DLL2020-WO
EN60825-1 (2001) CLASS 1 LASER PRODUCT
Complies with 21 CFR subchapter J as a
CLASS IIA LASER PRODUCT -
avoid long term viewing of direct laser light
CAUTION
Laser Radiation When Open
DO NOT STARE INTO BEAM