Datalogic Scanning DLL2020 - Manual (Page 34)

CONFIGURATION
27
3
3.9 DATA FORMATTING
Pre-defined Terminators
To program the terminator string follow the given procedure:
1) If not working in Programming Mode, scan the "Enter/Exit and Save
Programming Mode" code;
2) Choose the desired pre-defined terminator from the list below
3) Scan the "Enter/Exit and Save Programming Mode" code OR
configure other parameters.
Terminator = CR
8 7 1 2 3 4 5 1 1 0 5 0 5
Terminator = LF
8 7 1 2 3 4 5 1 1 0 6 1 1
Terminator = CR + LF
8 7 1 2 3 4 5 1 1 0 5 1 2