Datalogic Scanning DLL2020 - Manual (Page 18)

INSTALLING THE DLL2020
11
2
2.2 INTERFACE SELECTION
To select the scanner interface scan the following codes:
1. read the "Enter/Exit and Save Programming Mode" code;
2. scan either "RS232 default" code or "Keyboard Wedge default"
code.
NOTE
RS232 is the factory default interface.
Enter/Exit and Save Programming Mode
8 7 1 2 3 4 5 1 0 0 0 0 1
RS232 Default
8 7 1 2 3 4 5 1 0 0 1 0 0
Programming Mode is closed after scanning this code.