Datalogic Scanning DLL2020 - Manual (Page 17)

DLL2020
10
2
2.1.1 RS232 Direct Power
For those systems which supply electrical power on the serial port
(minimal requirements: +5 V dc, 250 mA), the following setup is
applicable.
Plug the cab 376 into the scanner port until a firm ‘click’ is heard.
Connect the serial cable to the cab 376 and the other end to the
appropriate serial port of your POS or computer.
2.1.2 Keyboard Wedge Direct Power
For those systems which supply electrical power on the keyboard port
(minimal requirements: +5 V dc, 250 mA), the following setup is
applicable.
Plug the cab 376 into the scanner port until a firm ‘click’ is heard.
Connect the wedge cable to the cab 376 and the other end to the
keyboard.
Computer
To computer
To keyboard Cable 376
DLL2020
To host
DLL2020
Cable 376