Vortech 2009-2010 5.7L Hemi Cars (Charger, Challenger, 300C) User Manual
Page 20
P/N: 4CL020-015 v1.0, 12/02/2014
©2014 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured
6
Steps E, F and G apply to 2009-2010 5.7L
Challenger M6 Only:
E. Remove power steering hose from pump to res-
ervoir. Cut hose as depicted in Fig. 5-e Set aside
the two longer pieces of hose and discard the
two shorter pieces. Replace the small bend with
a ¾ hose union and attach the 2 pieces of hose
together.
F. Install the hose so that the end with the single
bend attaches to the pump. Do not install clamps.
Mark union for correct clocking. Remove the hose
from the car and install stepless clamps at union.
(See Fig. 5-f)
G. Install hose assembly back into car using the
factory clamp to secure the hose to the reservoir
and a supplied hose clamp to attach the hose to
the power steering pump. (See Fig. 5-g)
Fig. 5-e (2009-2010 5.7L
Charger/Challenger M6)
Fig. 5-f (2009-2010 5.7L
Charger/Challenger M6)
5.
SUPERCHARGER MOUNTING PLATE INSTALLATION
Fig. 5-g (2009-2010 5.7L
Charger/Challenger M6)