Vortech 2009-2010 5.7L Hemi Cars (Charger, Challenger, 300C) User Manual
Page 21
P/N: 4CL020-015 v1.0, 12/02/2014
©2014 Vortech Engineering, Inc
All Rights Reserved, Intl. Copr. Secured
7
H. Start the supplied 8mm bolt in the outside hole
making sure that it does not protrude through the
back and impact the a/c line (2009-2010 5.7L
engines bend the a/c lines slightly as necessary.
Zip tie a piece of supplied 3/4” hose to bracket
to prevent rubbing. See Fig. 5-h).
I. Install a .475” spacer between the supercharger
mounting plate and the power steering pump at
the two remaining power steering pump mounting
holes. Install 8mm x 90mm bolts and washers.
J. Position the supercharger mounting plate as-
sembly in front of the engine and secure it to the
head using the three M8 x 100 mm bolts and one
M8 x 120mm bolt. (See Fig. 5-i).
K. Tighten all of the mounting plate bolts in steps
so that the protruding bolt heads do not hit the
power steering pump pulley.
5.
SUPERCHARGER MOUNTING PLATE INSTALLATION, CONT’D
Fig. 5-h
SUPERCHARGER
MTG PLATE
3/4” HOSE
OEM A/C
LINE
Fig. 5-i