Vortech 2013 Scion FR-S and Subaru BRZ - Manual (Page 16)

P/N: 4TF020-010 v2.1, 05/14/2013
©2013 Vortech Engineering, Inc
All Rights Reserved, Intl. Copr. Secured
9
Scion FR-S models only:
J. This procedure is to make room for the charge cooler ducts
to pass through. The connectors should be secured with
nylon tie-wraps after the modification has been made and
the ducts are in place.
K. Behind each headlight assembly, the main electrical connec-
tor lays in a cradle extending from the assembly.
L. Pull the connector from the assembly and place aside (do
not disconnect the connector).
M. With a one-inch drum grinder [in a drill or Dremel], remove
80-90% of the cradle. See Fig. 2B.
Fig. 2B