Vortech 2013 Scion FR-S and Subaru BRZ - Manual (Page 39)

P/N: 4TF020-010 v2.1, 05/14/2013
©2013 Vortech Engineering, Inc
All Rights Reserved, Intl. Copr. Secured
32
D. Locate the supplied discharge tube 'C' (MAF flange
attached) and OEM MAF module previously
removed. Ensure that the o-ring is intact on the MAF
module. Insert the MAF sensor module into the
flange and secure with the supplied M4 fasteners.
On the passenger side, connect discharge tube 'C'
to the CAC using the supplied 3” x 2-1/2” reducer
sleeve and clamps. Install a “bump” sleeve onto the
remaining open end of the tube after it is in place.
See Fig. 7D.
E. Attach the supplied mounting tab to the
supercharger mounting bracket using the screws
and nut plate. See Fig. 7E.
F. Thread the supplied rubber mount into tube 'D'. See
fig. 7F.
Fig. 7D
Fig. 7E
Fig. 7F