Air inlet installation – Vortech 2013 Scion FR-S and Subaru BRZ User Manual
Page 43
Advertising
P/N: 4TF020-010 v2.1, 05/14/2013
©2013 Vortech Engineering, Inc
All Rights Reserved, Intl. Copr. Secured
36
A. Locate the supplied airbox assembly and two of the rubber
cushion mount spacers and screws originally installed in the
OEM airbox.
B. Temporarily remove the steel inserts from the rubber cushion
mount spacers. Install the cushion mounts into the center of
the two supplied
5
⁄
8
" ID spacers. See Fig. 9A.
C. Insert two of the rubber cushion mounts into the mounting
tabs attached to the supplied airbox assembly. See Fig. 9B.
D. Attach the supplied 5” x 3-
1
⁄
2
” rubber coupler to the inlet of
the supercharger. Loosely place one each of the supplied
#80 and #56 clamps onto the sleeve.
Fig. 10A
Fig. 10B
10. AIR INLET INSTALLATION
Advertising