Vortech 2013 Scion FR-S and Subaru BRZ - Manual (Page 33)

P/N: 4TF020-010 v2.1, 05/14/2013
©2013 Vortech Engineering, Inc
All Rights Reserved, Intl. Copr. Secured
26
D. Using the provided wires, solder wire
extensions onto the harness. Seal solder
joints with heat shrink tubing. See Fig. 5D.
E. Route the modified MAF under the throttle
body and under the intake manifold and
away from the alternator. See Fig. 5E.
F. Continue to route the harness and
connector over to the passenger side
headlight, and down behind the bumper
cover.
G. Secure the harness with nylon ties insuring
that the harness is away from hot or sharp
objects.
Fig. 5D
Fig. 5E