Xblue Networks X-50 - Manual (Page 21)

XBLUE Networks 21
Setup
Sidec
ar
2
Connecting the Sidecar
•
Step 1 - Remove the contents from the box
•
Step 2 - Remove the power from the telephone
•
Step 3 - Remove the rubber protector from the pins on the Sidecar
•
Step 4 - Securely connect the Sidecar to the telephone by inserting the pins and aligning the plastic posts.
•
Step 5 - Secure the Sidecar to the phone using the supplied screws.
•
Step 6 - Plug the network connection into the telephone and then plug it into the AC outlet.
Caution:
Before Connecting the Sidecar to an existing telephone be
sure that it is unplugged! Failure unplug the telephone will
do damage to both the telephone and sidecar and is not
covered under warranty!