Xblue Networks X-50 - Manual (Page 46)

Telephone Feature Description Table
46 XBLUE Networks
4
Call Hold
Call Hold
Description:
Both intercom and telephone line calls (PSTN or SIP Trunk) can be placed on hold. Once on hold the held party will
receive Music on Hold (MOH).
Operation:
While on a call you just press the hold button .
Use the flash key on an analog (Single Line) telephone to place a call on hold.
Notes:
1. When using an analog (Single Line) telephone without a “Flash” key may cause erratic operation.
2. Music on Hold is a file that is stored in the X-50 System and not in the telephone. If using the
X2020 telephone on a different gateway, Music on Hold may not work the same way.
Call Log
Description:
The X2020 stores a list of missed, received and dialed calls, which you can used to make or return calls.
Operation:
Press the “Menu” softkey and then press the check button , Call Log will be highlighted. Press the Check
button , and scroll down to select the desired call log. Select the desired number and press the check
button twice to recall or callback the selected number.
Notes:
1. The call log numbers will reference the extension’s class of service, call restriction and call routing rules
before the call is placed.
2. Your local area code must be programmed into the Call Routing Tables in the X-50 system.