Xblue Networks X-50 - Manual (Page 42)

Telephone Feature Description Table
42 XBLUE Networks
4
Bu
sy Callback
Busy Callback
Description:
The X2020 supports busy callback to an extension. This allows you to dial 6 when you call an extension and get a
busy signal. Once Busy Callback is activated, the called extension will ring your extension when it becomes idle.
You can also cancel the Callback by dialing *66.
Operation:
A confirmation tone is heard once the busy callback feature is enabled.
You can dial *66 to cancel a busy callback.
Notes:
1. Busy callback will not work if the called extension has busy call forward enabled.
Call Forking
Description:
This feature will allow a transferred telephone line or intercom call to ring at two simultaneous destinations, such
as an extension (LAN/WAN) or a cellular telephone. When one party answers the call the other ring telephone will
stop ringing.
Operation:
To activate:
•
*26 + t + Extension Number
•
* + 26 + t + * + (pswd) + * + Outside Number
•
t= 0 for intercom
•
1 for outside line
•
2 for both intercom and outside line
To cancel
•
**26
Notes:
1. This feature will not work when the extension is programmed as the attendant or alternate attendant.
2. This feature will not work for a call that rings to a UCD group.
3. Telephone line calls must be transferred to activate this feature.
4. This feature will only work with one or more SIP Trunks.
This feature requires SIP Trunks - It will not work with PSTN Lines.