Xblue Networks X-50 - Manual (Page 80)

Web Programming
80 XBLUE Networks
6
Ph
one
Forwarding Settings
It is possible to forward your calls to a different location such as a voice mailbox when you are unavailable, busy or
in Do not Disturb. With SIP Trunks you can even use “Call Forking” which allows you to ring your extension and up
to two different telephone numbers, such as cell phones. In addition, you can select which types of calls, Intercom
(internal), Outside (telephone line) or both, will following the forwarding for each of these forwarding conditions. It
is possible to use more than one forwarding type. When a call matches a forwarding condition, the call will be
forwarded. If not, the system will review the next forwarding condition. If no forwarding condition matches, the
call will not forward.
Click on the check Box to enable the type of call forwarding that you would like to use.
Always Call Forwarding:
This feature forwards call calls, based on the forward type, without ringing your telephone or giving you a chance
to answer the call. In addition, there is no indication that a call is “ringing” your extension.
•
Always Call Forwarding Type: - Select which type of calls to your extension should be forwarded, ICM
(Internal), Outside (telephone line calls), or Both. When a call rings your extension and matches this
entry, the call will be forwarded to the entered destination. Otherwise, it will check the next forwarding
condition. If no match is found, the call will not forward.
•
Always Forward Destination: - Enter the forward destination. This can be another extension, voicemail,
or an external telephone number such as a cell phone. Direct Inward Dial numbers (Requires SIP
Trunks) will follow the “Outside” forwarding Condition.
Busy Call Forward:
This feature will forward calls when you are busy on your telephone and overrides the “Call Waiting” feature.
•
Busy Call Forward Type: - Select which type of calls to your extension should be forwarded, ICM (Inter-
nal), Outside (telephone line calls), or Both. When a call rings your extension and matches this entry,
the call will be forwarded to the entered destination. Otherwise, it will check the next forwarding condi-
tion. If no match is found, the call will not forward.
•
Busy Forward Destination: - Enter the forward destination. This can be another extension, voicemail, or
an external telephone number such as a cell phone. Direct Inward Dial numbers (requires SIP Trunks)
will follow the “Outside” forwarding Condition.
No Answer Call Forward:
This feature will only forward unanswered calls. At default, this feature is enabled, with a forwarding type set to
“Both” internal and external calls.
•
No Answer Call Forward Type: - Select which type of calls to your extension should be forwarded, ICM
(Internal), Outside (telephone line calls), or Both. When a call rings your extension and matches this
entry, the call will be forwarded to the entered destination. Otherwise, it will check the next forwarding
condition. If no match is found, the call will not forward.
•
No Answer Call Forward Destination: - Enter the forward destination. This can be another extension,
voicemail, or an external telephone number such as a cell phone. Direct Inward Dial numbers (Requires
SIP Trunks) will follow the “Outside” forwarding Condition.
•
No Answer Time (sec): - This is the amount of time that a call will ring at your extension before it is
considered a “No Answer” call. At the expiration of this timer, the call will be forwarded to the entered
destination.