Lenco LED-3901 - Manual (Page 19)

EN 19
The common interface allows the use of a Common Access Module to enable you
to view scrambled (pay to view) service. These services are provided by TopUp
TV and others. The Common Access Module and viewing card can be obtained
from the service provider.
Note: Do not repeatedly insert or remove the Common Access Module as this
may damage the interface and cause a malfunction.
This feature is not available in all countries.
To insert the Common Access Module
• Before you insert the Common Access Module, ensure that the TV is switched
off and the viewing card is inserted in accordance with the Service Provider’s
Instructions.
• Insert the Common Access Module into the slot. Flip the Common Access Module
to another side and try again if you feel resistance.
• Switch the TV on.
To remove the Common Access Module
• Before you remove the Common Access Module, ensure that the TV is switched
off.
• Pull the Common Access Module from the slot.
• Switch the TV on.
To view the module information
• Press the MENU button to display the main menu. Press the buttons to
select CHANNEL and then press the OK button.
• Press the buttons to select CI Information and then press the OK button.
• A CI Information main menu will pop up. Press the buttons to select the
options and then press the OK button to view.
Signal Information (DTV Mode)
CUSTOMIZING TV SETTINGS
• Press the MENU button to display the main menu. Press the buttons to
select CHANNEL and then press the OK button.
• Press the buttons to select Signal Information and then press the OK button
to view the signal information.
CI(Common Interface) Information (DTV Mode )