Lenco LED-3901 - Manual (Page 22)

EN 22
Select Disk
Select the disk where you want to store your recorded
content.
Check PVR File System
Press the OK button, the system will now check your
USB device’s suitability for PVR. The system will show
“Checking”. Upon the completion the system will show
either “Success” or “Fail”.
USB Disk
If no USB storage device is connected, it will show
“No USB Disk”. If the Check PVR File System has a
“Success” it will show “Pass”.
Format
Press the OK button, a File System Size menu will
pop-up. Press the buttons to select your preferred
file type between FAT32 and HiSpeed FS. If you select
HiSpeed FS, press the button and then press the
buttons to select your preferred file size. Press
the OK button to confirm and then press the button to
start formatting.
Time Shift Size
After formatting the Time Shift Size menu will appear
if you have selected HiSpeed FS in PVR File System
Type. Press the buttons to select your preferred
file size. Press the OK button to confirm. This option
cannot be chosen if you have selected FAT32 in PVR
File System Type.
Speed
This shows you the transfer rate of your USB storage
device.
CUSTOMIZING TV SETTINGS
PVR File System
Select Disk C:
Check PVR File System Start
USB Disk
Format
Time Shift Size
Speed
Move OK Select
MENU Back
File System Size
Move OK Select
MENU
Back
PVR File System Type
PVR File System Type ALL
FAT32
SD 208 Mins
HD 59 Mins