Max 10 fpga configuration overview, Max 10 fpga configuration overview -1 – Altera MAX 10 FPGA User Manual
Page 4
MAX 10 FPGA Configuration Overview
1
2015.05.04
UG-M10CONFIG
You can configure MAX
®
10 configuration RAM (CRAM) using the following configuration schemes:
• JTAG configuration—using JTAG interface.
• Internal configuration—using internal flash.
Supported Configuration Features
Table 1-1: Configuration Schemes and Features Supported by MAX 10 Devices
Configuration Scheme
Remote System
Upgrade
Compression
Design Security
SEU Mitigation
JTAG configuration
—
—
—
Yes
Internal configuration
Yes
Yes
Yes
Yes
Related IP Cores
• Altera Dual Configuration IP Core—used in the remote system upgrade feature.
• Altera Unique Chip ID IP Core—retrieves the chip ID of MAX 10 devices.
Related Information
•
MAX 10 FPGA Configuration Schemes and Features
Provides information about the configuration schemes and features.
•
MAX 10 FPGA Configuration Design Guidelines
Provides information about using the configuration schemes and features.
•
on page 2-16
•
Altera Dual Configuration IP Core
©
2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at
www.altera.com/common/legal.html
. Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
www.altera.com
101 Innovation Drive, San Jose, CA 95134