Max 10 fpga configuration schemes and features, Configuration schemes, Jtag configuration – Altera MAX 10 FPGA User Manual
Page 5: Max 10 fpga configuration schemes and features -1, Configuration schemes -1, Jtag configuration -1
MAX 10 FPGA Configuration Schemes and
Features
2
2015.05.04
UG-M10CONFIG
Configuration Schemes
Figure 2-1: High-Level Overview of JTAG Configuration and Internal Configuration for MAX 10 Devices
CRAM
MAX 10 Device
JTAG In-System Programming
CFM
Configuration Data
Internal
Configuration
JTAG Configuration
.sof
.pof
JTAG Configuration
In MAX 10 devices, JTAG instructions take precedence over the internal configuration scheme.
Using the JTAG configuration scheme, you can directly configure the device CRAM through the JTAG
interface—
TDI
,
TDO
,
TMS
, and
TCK
pins. The Quartus
®
II software automatically generates an SRAM
Object File (.sof). You can program the .sof using a download cable with the Quartus II software
programmer.
Related Information
Configuring MAX 10 Devices using JTAG Configuration
Provides more information about JTAG configuration using download cable with Quartus II software
programmer.
©
2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at
www.altera.com/common/legal.html
. Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
www.altera.com
101 Innovation Drive, San Jose, CA 95134