Altera MAX 10 FPGA - Manual (Page 49)

Instantiating the Altera Dual Configuration IP Core
To instantiate the Altera Dual Configuration IP Core, follow these steps:
1. On the Tools menu of the Quartus II software, click IP Catalog.
2. Under the Library category, expand the Basic Functions and Configuration Programming.
3. Select Altera Dual Configuration and after clicking Add, the IP Parameter Editor appears.
4. In the New IP Instance dialog box:
• Set the top-level name of your IP.
• Select the Device family.
• Select the Device
5. Click OK.
4-2 Instantiating the Altera Dual Configuration IP Core
UG-M10CONFIG
2015.05.04
Altera Corporation MAX 10 FPGA Configuration IP Core Implementation Guides
Send Feedback