Subaru 2012 Tribeca Navigation System User Manual
Page 23
22
Setting Route
3
Select
for setting the destination.
The system will calculate the route and display the entire route to the destination on
the map.
Select
for a waypoint. The system will program the address of the waypoint
on your route (see Page 86). You can set up to 5 waypoints per trip.
4
Select (start).
Route guidance will begin along the displayed route.
NOTE
• If the system cannot find your desired route, select
(change route). This will allow you
to access the ROUTE OPTIONS screen, from which you can prompt the system to calculate a
new route. (See Page 52.)
• Selecting
for more than ten seconds will start the demonstration mode operation. Press
the
button or select
to cancel the demonstration mode.
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 22