Subaru 2012 Tribeca Navigation System - Manual (Page 59)

58
3 Specify the order in which all the set waypoints are to be visited.
Choose the location of the waypoint to be added, and then select (add).
4 Select (calculate).
NOTE
• When a new destination is set using (destination), it will replace the current destination and the route calculation will be carried
out again.
• Step 3 must be performed for the second and any subsequent waypoints.
• Repeat Steps 1 to 3 for each waypoint to be set.
Route Options
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 58