Subaru 2012 Tribeca Navigation System - Manual (Page 123)

122
General Information
■ Accuracy of the route guidance
The conditions listed below do not indicate a malfunction.
(1) The guidance might prompt the driver to drive straight
even though the vehicle is being driven on a straight road.
(2) The directional guidance could display multiple place
names.
(3) If the vehicle makes a turn at an intersection before the
guided route, the wrong type of voice guidance could be
outputted.
(4) The guidance might not be outputted while the vehicle
is making a turn at an intersection.
(5) The system might not be able to search for the proper
route.
(6) If there is no road to the destination or if there is only a
narrow road, the route might be indicated up to an area
that is short of the destination.
(7) The repeat search could take a long time while the
vehicle is being driven at high speeds.
(8) While the system is searching again for the route, the
route indication might not appear in time for the next
right or left turn.
(9) The route might not change even if a search is made
again.
(10) The system might guide the driver to make a U-turn.
(11) The system might guide the driver to a road that cannot
actually be travelled (such as a road to which entry is
prohibited).
(12) The system might not output guidance even if the
vehicle is driven in reverse on the guided route.
(13) The system might not use a local ferryboat even if the
ferry priority is selected.
(14) If the intersection that you’re being guided to is near the
end of the route search, the system might not be able
to provide guidance.
(15) The route might not go on a toll road even if the toll-road
priority is selected.
Similarly, a route that uses a toll road could appear on
the screen even if the toll-road priority is not selected.
(The driver may or may not be able to select “toll-road
priority” if both toll and free roads are available.)
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 122