MIPRO ma707 - Manual (Page 10)

Handheld Wireless Microphone
The optional hand held microphone is modular in design. (1) Grille (2)
Anti-Rolling Colored Ring (3) Cartridge (4) Housing (5) Battery Status
Indicator (6) Power On-Off Switch (7) Battery Compartment (8) Battery Cap.
It also incorporates "NoiseLock" dual-squelch circuitry to reduce interference.
(Fig.1)
1. Grill: Protects the cartridge and prevents " POP " noise.
2. Anti-Rolling Colored Ring: For frequency identification. Its polygonal shape also
prevents the microphone from rolling when placed on a flat surface.
3. Cartridge or microphone element/insert.
4. Housing: Upper portion is connected to capsule module. Internally, it houses the
transmitter PCB and battery compartment.
5. Battery Status Indicator: Indicates power on / off and the battery status. When the
power switch is turned ON, the red LEDs indicator flashes briefly, indicating normal
battery status. If no flash occurs, it has either no battery or the battery is discharged
or installed incorrectly. If after power on the indicator stays lighted, it warns that the
battery is weak and should be replaced.
6. Power On-off Switch: Slide the switch for power " ON " or " OFF ".
7. Battery Compartment: Designed to accommodate one 9V battery.
8. Battery Cap: Covers the battery compartment.
Features
1 2 4 3 7 6 5
O
N
O
F F
8
Operating Manual
- 8 -
VHF