MIPRO ma707 - Manual (Page 18)

Belt Pack Transmitter
Operating Manual
- 16 -
Operating Instructions
1. To adjust frequency group (6), frequency channel (7), volume (9), GT/MT Switch (10),
and read the unused indicator (8), simply push down both snap locks on the sides
of battery cover and flip it backwards to expose the adjustment panel.
2. Before power on, ascertain if same channel (7) was set up for both receiver and
microphone. If not adjust to same channel accordingly.
3. The LED indicator flashes briefly when power on indicating normal battery status. If
no flash occurs it has either no battery, the battery is drained or installed incorrectly.
Change accordingly.
4. Adjust Gain Control to desired volume. (Gain Control is irrelevant when switch to
GT position).
5. Plug the microphone connector into the input jack (1) and tighten the connector
screw by clockwise direction as shown in (Fig. 2).
Lavalier
Headset
Please aim of
the fillister
and insert the
connector
Capsule Connectort
(Fig.2)